Power Function is preconfigured, you may change the power function using the box to the right. Step 3 In this step, you can configure your calibration targets On the Find Source dialog, select the Asus – Asus ProArt Monitors.On the Source Settings tab, click the Find Source button.For a spectrophotometer, no special selection is required. On the Meter Settings tab, under the Meter Mode drop-down, for a colorimeter select a meter mode appropriate for the display type you are calibrating.If your meter is not listed on the Find Meters dialog, just click Search. On the Find Meters dialog, select your meter if it is listed, then click Search.Calibrates the monitor using a 1D LUT for grayscale calibration, and a 3×3 matrix for color gamut correction.Calibrates the monitor using a 1D LUT for grayscale calibration, and a 3D LUT for color gamut correction.Connect via the method you wish you calibrate with. On the Find Display dialog, you can choose two methods for calibration.This can be a Thunderbolt 3 cable or a USB-A to USB-C cable (with the USB-C end plugged into the 90W Thunderbolt 3 port on the back of the monitor Note: If you’re using a Thunderbolt 3 cable for your video connection, no extra cables are needed, If you’re using HDMI or DisplayPort for your video connection, you will also need to connect a USB cable between your computer and your monitor.Step 2 Here you will connect to your Asus Monitor and calibration hardware
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |